I've had a problem with my Beocenter 8500 tape deck for a while now. I thought that a new belt would fix it but it hasn't.  It's the Type 1 tape deck (the one with a single belt, and 2 motors). It does work but it's got an issue.  If you start to play a tape, you can see the pinch rollers turn, but the spindles don't.  Afte a second or two, it stops. This can be solved if I just fast-forward or rewind for just a moment.  Once that's been done, it will always play fine - every time.  You can then stop and start playing several times - works every time. Next day, I switch it on and try to play a tape however, same thing always happens. I had ordered a new belt for it anyway as it's never been replaced, and I replaced that, but it's only when I started to have a proper poke around inside that I realised - the belt doesn't seem to have anything to do with the tape spindles.  It has a separate motor driving those with a little cog that moves from left to right, depending which one needs to be turning.  Replacing the belt has therefore not solved the issue (and I added a little watch oil to that cog and to the spindles, while I had it open). So I can play tapes, but always with this little workaround of having to fast-forward and rewind first.  Anyone familiar with the issue?