Beolab 10 paint melting

6 replies
DA
DanteM
Bronze
189 posts
Posted January 13, 2023 at 06:20 GMT
#687097
Hi, needing some advice here.
My Beolab 10 acoustic lens started to melt. It looks like the paint plasticizer migrated to the surface and spoiled it. I managed to clean the sticky paint, but now I have a plain smooth black aluminum finishing, which doesn't look nice when compared with the old black matte surface. My question: does anyone know which kind of paint should I use on aluminum parts to get that rubberdized look and feel again? Regular black paint for metal + a matte varnish? Or is there a black paint that already gives the final finishing without varnish? Thanks, Dante.  
 
DA
DanteM
Bronze
189 posts
Posted January 13, 2023 at 18:23 GMT
#697767
After the cleaning...
Tignum
Tignum
Gold
995 posts
Posted January 13, 2023 at 18:55 GMT
#697770
Hello DanteM, I have good experience with powdercoating. I brought a very sticky BeoLab 7-4 to a local shop, they sandblasted the empty cabinet (I made sure to put screws to avoid the threads get damaged or covered) and coated it with a light textured black coating. They normally make you choose from samples so you can choose how smooth or rough you want the texture. It does not feel rubbery but is much more pleasant to the touch than before and very tough. I had some Beo4's done as well and the coating holds really well. I can send a photograph tomorrow when there is daylight again if you want. Regards, Johan

Location: Netherlands

My B&O Icons:

Beoremote-Beo4.png Beoremote-Beo4.png
Beovision-10.png Beovision-10.png
Beosound-5.png Beosound-5.png
Beoremote-One.png Beoremote-One.png
Beoplay-H8i.png Beoplay-H8i.png
Beoplay-A1.png Beoplay-A1.png
Beomaster.png Beomaster.png
DA
DanteM
Bronze
189 posts
Posted January 13, 2023 at 20:18 GMT
#697774
That's a great idea! I didn't think of that before! I've easy access to a guy who paints with powder. Will check on that. Thanks for the tip!
Tignum
Tignum
Gold
995 posts
Posted January 14, 2023 at 11:53 GMT ? Edited January 14, 2023 at 11:53 GMT
#697791
Hi, I tried to capture the texture of the powdercoating on my 7-4. I can tell it was a massive improvement from the scratched and sticky 'before' situation. But it also costed more than the speaker :-). Good luck, let us know the result! Regards, Johan

Location: Netherlands

My B&O Icons:

Beoremote-Beo4.png Beoremote-Beo4.png
Beovision-10.png Beovision-10.png
Beosound-5.png Beosound-5.png
Beoremote-One.png Beoremote-One.png
Beoplay-H8i.png Beoplay-H8i.png
Beoplay-A1.png Beoplay-A1.png
Beomaster.png Beomaster.png
GL
Glitch
Bronze
395 posts
Posted January 14, 2023 at 16:30 GMT
#697800
DanteM: A couple of other things to consider are texture paint in a spray can or Plasti-dip spray. I don't know if these would be available where you are at, but they easy to find in the US (except for maybe California). These would not be as nice as the powder coating, but would be easier to remove if you didn't like the results. Glitch  
or
BeoWorld Gold Membership card
Join BeoWorld

Register to access the forums, reference material, and exclusive member benefits — including our monthly prize draw.

Become a Member

December 2026 Prize Draw

Gold Members Only

As a Gold member you're automatically entered into our exclusive prize draw — your chance to win iconic Bang & Olufsen products. A unique benefit of BeoWorld Gold membership, every draw brings a new opportunity to win something special.

View Prize Go For Gold
BeoSound Level

1st Prize

BeoConnect Core

2nd Prize

BeoRemote Halo

3rd Prize