I have a Beosound 3200 connected to Beolab 3000 speakers via a Beolab 2 with all fully wired beolink mk 2 cables.
For some reason both speakers have stopped displaying any info in the displays but are both working otherwise. I wired a spare Beolab 3000 speaker separately and the display on that didn’t work either so assume problem is with the Beosound 3200. Can anyone offer any advice on what the problem might be please. Is there any way of resetting the Beosound?
Thank you to our Sponsors
Beosound 3200 not sending data to speaker displays
3 replies
Hi Sooty - have you checked that the slider switches on the SIDE of thee Beolab 3000s are set to AUDIO? If set to VIDEO, they won’t show the correct status.
Lawrence
Hi and welcome to Beoworld!
Are you sure that the cables are not faulty? Have you tried swapping them out/around and/or trying both powerlink sockets?
If you have a multimeter, check the continuity of the PL cables - pin 6 is data and pin 7 is data ground. Make sure that pin 6 isn't shorted to one of the other connections.
It's also worth disconnecting anything else from the BeoSound (Masterlink and Aux socket) to rule those out as part of the problem.
Location: Warwickshire, UK
My B&O Icons:
Please Log In to Reply
You must be logged in as a BeoWorld member to post replies to forum threads.
or
Join BeoWorld
Register to access the forums, reference material, and exclusive member benefits — including our monthly prize draw.
Become a MemberDecember 2026 Prize Draw
Gold Members OnlyAs a Gold member you're automatically entered into our exclusive prize draw — your chance to win iconic Bang & Olufsen products. A unique benefit of BeoWorld Gold membership, every draw brings a new opportunity to win something special.
1st Prize
2nd Prize
3rd Prize