I want to check if this plan will work, and I know it's likely the experts on here will know. I'm pretty confident I've got this right, but I would like to check.
I want to use my BV7 to control a cinema system. This is what I have:
- Beovision 7-32, Mk3
- Beolab 7.2, mounted on the BV7 stand
- Beosound 4
- Beolab Pentas
- Beolab 6000s
- Beolab 7.4
- I leave the BL7.1 connected to the BV7, and use that when I am watching TV normally - the BV7 will be in the corner of the room, so I will only use the BL7.1 for sound when watching that
- I connect the Beolab Pentas as front speakers and Beolab 6000s as rear speakers, to the BV7
- I connect my newly-bought Beolab 7.4 as a second centre speaker to the BV7, and that will go in the centre of the room
- I set the BV7 to Opt.2
- I use the BV7's sound settings to set up a main sound system for watching TV - using the BL7.1 only
- I connect the projector to the BV7's VGA output, and switch to Cinema mode using Format 0
- I then also use the BV7's sound settings to set up a second sound system for Cinema - using the Beolab 7.4 instead of the Beolab 7.1 as the centre speaker, and using the BL Pentas and BL6000s too (Speaker 5 setting)
- I also have my Beosound 4 connected via ML, and that will be in Opt.0
- I use the Sound options on the BV7 to use only the Front and Rear speakers when listening to audio sources (Speaker 4 setting)
Location: Liverpool
My B&O Icons:
Old enough to have gazed at classic B&O HiFi in Plumbs shop windows in the 80s...
