Hi, I have the following situation: a Beovision 7-40 from 2007 and 2 Beovision 6-26 also from 2007. The TVs are in three different rooms and the setup is as follows:

• the BV 7-40 is the main TV and it is connected to a set-top box P570 Hybrid from Ocilion
• the BV 6-26 are each in a different rooms and linked to the BV 7-40 with a masterlink cable and the additional coax cable.

All worked fine until (yes, I know, that is how many discussions in forums start...) the set top box was changed as we changed the provider. Previously, another box provided the tv channels and the whole system worked well until the new provider installed the Ocilion. The technicians were not well familiar with B&O but managed to get the main TV working ("you cannot link several tv's to one decoder"). The B&O shop where we bought everything from has gone out of business and the other B&O retailers in the area were of little help. As everything had been working fine, I have tried the setup of all the TVs and I can get the music from radio or CD (linked to the BV 7-40)in all the rooms. But I cannot get the TV on the remote TVs working. I know that I will have the same tv channel on all the Beovisions and that is the way I would like it to be. Can anyone help me regarding how I would need to set up the BVs in order to be able to watch the tv in all the rooms? As it did work before, I suppose the technicians changed something when they did the set up (but I was not in when they did and apparently they fiddled around quite a bit) And the second part of my help call: the previous set top box was IR controlled, so it was controlled via the PUC of the BV 7-40. The Ocilion is bluetooth and the IR PUC does not help. Any ideas as to which cable would do the trick? (The Ocilion has a RJ12 labeled as IR input in its manual) Thank you for any advice you may give.